Waterproofing failures are the most common structural complaint from Chennai homeowners, especially after monsoon season. Understanding the cause of water problems helps you fix them correctly — not just temporarily.
Terrace Leaks
The most common waterproofing complaint. Usually caused by: cracks in waterproofing membrane, blistering from heat-UV cycles, inadequate slope causing water ponding, or blocked drains. Fix: identify source, repair or re-apply system over the affected area after proper preparation.
Discuss Your Project
Tell us about your project and we'll be in touch.
Bathroom Seepage to Below Floor
Usually caused by: waterproofing not applied before tiling, cracks in the waterproofing layer after tile movement, or failed water test after application. Fix: in most cases, full bathroom waterproofing redoplication requires tile removal. Address before it damages structural elements below.
Damp Walls
Causes include: rising dampness from inadequate plinth DPC, lateral dampness from external soil contact, or rainwater penetration from cracks in plaster or wall joints. Identify source before applying any treatment.
Sump Leakage
Usually poor original waterproofing or shrinkage cracks. Fix: drain the sump, prepare surface, apply crystalline or cementitious waterproofing system, re-test.
FAQs
Can I waterproof over existing tiles?
Some surface-applied waterproofing systems can be applied over tiles without removal. However, for bathroom floor waterproofing where the primary layer has failed, tile removal is usually required for a lasting fix.
Explore Buildogram Marketplace
Need expert guidance?
Talk to our structural engineers for project-specific advice.