Fabrication & Structural Steel in Chennai
The backbone of industrial and fast-track construction. Whether you are building a massive warehouse in Sriperumbudur or a lightweight roof structure in Adyar, we supply certified, full-weight structural steel beams and plates that guarantee safety and longevity.
The 'Under-Weight' Steel Scam
A massive issue in the local steel market is 'rolling tolerance abuse'. A supplier will quote a very low price for a 150mm I-Beam, but deliver a beam where the steel is 1mm thinner than the IS standard. Over 10 tons of steel, they steal lakhs of rupees from you, and your building's load capacity is dangerously compromised. We weigh and measure every batch with digital calipers to prevent this.
Structural Steel Procurement
- 1. Material SpecificationStructural steel isn't just iron. We verify the grade (e.g., IS 2062 Grade A/B/C) to ensure it has the correct tensile strength and ductility required by your structural design.
- 2. Dimensional Tolerance CheckWe inspect the thickness of the flanges and webs. Many unbranded suppliers sell "under-weight" sections that are thinner than specified, dangerously reducing the load capacity.
- 3. Mill Test Certificate (MTC)Every batch of steel must come with an MTC from the manufacturer (like SAIL, Tata, or Jindal), legally proving its chemical composition and physical strength.
- 4. Anti-Corrosion TreatmentBare steel rusts instantly. We ensure all fabrication steel is properly shot-blasted and coated with red oxide primer or hot-dip galvanized before leaving the yard.
What You Receive
- ✓ Material Takeoff & BOQ Generation
- ✓ Verified Supply of Beams, Columns & Plates
- ✓ Mill Test Certificates (MTC)
- ✓ Weight Verification at Bridge
- ✓ Anti-Corrosion Primer Application
Perfect for PEB (Pre-Engineered Buildings)
Modern factories and warehouses are built using PEB technology. We supply the raw high-tensile plates that are cut and welded into custom tapered columns and rafters. With certified steel, your PEB structure can easily achieve massive clear spans (over 30 meters) without internal columns.
Frequently Asked Questions
What is the difference between TMT Steel and Fabrication Steel?
TMT (Thermo-Mechanically Treated) steel refers to the ribbed bars buried inside concrete columns to give them tensile strength. Fabrication Steel refers to exposed structural shapes (I-beams, C-channels, plates) used to build metal frameworks, factory sheds, and PEB (Pre-Engineered Buildings).
Why does my industrial shed rust so fast in Chennai?
Chennai's coastal air is highly corrosive due to salt and humidity. If the steel isn't thoroughly cleaned (shot-blasted) to remove mill scale before painting, the paint will flake off in months. For coastal areas, we strongly recommend Hot-Dip Galvanizing or heavy-duty Epoxy coatings instead of basic red oxide primer.
What does "IS 2062" mean?
IS 2062 is the Indian Standard for general structural steel. It ensures the steel has a minimum yield stress (usually 250 MPa). If you buy cheaper, non-standard steel, it might snap instead of bending under heavy wind or crane loads.
Can I use fabrication steel to add a floor to my house?
Yes! Structural steel is much lighter than concrete. If your old building's foundation is weak, adding a lightweight steel-framed floor (covered with cement fiber boards) is a very common, safe, and fast solution.
Serving the Chennai Region
We provide engineer-led construction support across major residential and commercial hubs in Chennai.
Related Building Materials